Filter criteria definitions
When creating a Custom Device Filter or a Site Device Filter, you can filter on devices that match the criteria listed in the Filter criteria definitions table. Refer to Creating a filter.
To see the available options for each list of criterion restrictions, refer to the following table.
Restriction list options
Criterion Restrictions List | Options |
---|---|
1 | • contains • does not contain • is empty • is not empty • begins with • does not begin with • ends with • does not end with NOTE Certain symbols can be used as wildcard characters. Refer to Filter criteria wildcard characters. |
2 | • less than • less or equal to • equal to • greater or equal to • greater than • between |
3 | • is • is not |
4 | • before • after • older than 7 days • older than 14 days • older than 30 days • older than 60 days • older than 90 days Or, select a specific date from the calendar tool. |
5 | • contains • does not contain • version less than • version less than equal to • version equal to • version greater than equal to • version greater than NOTE Certain symbols can be used as wildcard characters. Refer to Filter criteria wildcard characters. |
6 | • is a member of • is not a member of |
7 | equal to |
Filter criteria definitions
Criterion Name | Criterion Restrictions List | Options |
---|---|---|
.NET Version | 1 | Enter value. |
Additional IP Address | 1 | Enter value. |
Agent Version | 2 | Enter value. |
Antivirus Product Name | 1 | Enter value. |
Antivirus Status | 3 | • Running and Up To Date • Running and Not Up To Date • Running • Not Detected |
Architecture | 1 | • 32 Bit OS • 64 Bit OS |
Attached Device Driver File | 1 | Enter value. |
Attached Device Driver Manufacturer | 1 | Enter value. |
Attached Device Driver Modified | 4 | Select date. |
Attached Device Driver Name | 1 | Enter value. |
Attached Device Driver Name/Version | 5 | Enter name and version. |
Attached Device Driver Version | 5 | Enter value. |
Attached Device Name | 1 | Enter value. |
Attached Device Port Name | 1 | Enter value. |
Attached Device Type | 1 | Enter value. |
BIOS Name | 1 | Enter value. |
BIOS Release Date | 4 | Select date. |
BIOS Version | 1 | Enter value. |
Class | 1 | Enter a value or one of the following options: • com.centrastage.csm.DattoContinuityDevice • com.centrastage.csm.DattoNetworkingDevice • com.centrastage.csm.Device • com.centrastage.csm.device.EsxiHost • com.centrastage.csm.device.Printer |
CPU | 1 | Enter value. |
Date Created | 4 | Select date. |
Description | 1 | Enter value. |
Device Group | 6 | Select group. |
Device Type | 1 | Select type. |
Disk Description | 1 | Enter value. |
Disk Free Space | 2 | Enter value. NOTE Use G (gigabytes), M (megabytes), K (kilobytes), or exact number for bytes. For example: 4G, 21M, 4K, or 435. |
Disk Size | 2 | Enter value. NOTE Use G (gigabytes), M (megabytes), K (kilobytes), or exact number for bytes. For example: 4G, 21M, 4K, or 435. |
Display Adapter | 1 | Enter value. |
Domain | 1 | Enter value. |
EDR Install Date | 4 | Select date. |
EDR Status | 3 | • Active • Error • Inactive • Pending |
External IP Address | 1 | Enter value. NOTE An asterisk can be used as a wildcard character. Refer to Filter criteria wildcard characters. |
Favorite | 7 | • Yes • No |
Hostname | 1 | Enter value. |
IP Address | 1 | Enter value. NOTE An asterisk can be used as a wildcard character. Refer to Filter criteria wildcard characters. |
Last Audit | 4 | Select date. |
Last Reboot | 4 | Select date. |
Last Seen | 4 | Select date. |
Last User | 1 | Enter value. |
(Deprecated) Local Cache | 7 | • Yes • No IMPORTANT With the 10.0.0 release, the local cache functionality has been deprecated as part of Datto's continued commitment to security. References to the local cache remain in the UI at present, but will be removed in the future. |
MAC Address | 1 | Enter value. |
Managed Antivirus | 3 | • Enforced • Inactive |
Managed Device | 7 | • Yes • No |
Manufacturer | 1 | Enter value. |
Memory | 2 | Enter value. NOTE Use G (gigabytes), M (megabytes), K (kilobytes), or exact number for bytes. For example: 4G, 21M, 4K, or 435. NOTE This value refers to usable memory (the total physical installed memory minus "hardware reserved" memory). |
Model | 1 | Enter value. |
Monitor/Screen | 1 | Enter value. |
Motherboard | 1 | Enter value. |
Network Adapter | 1 | Enter value. |
Network Node | 7 | • Yes • No |
NIC Vendor | 1 | Enter value. |
OnDemand Device | 7 | • Yes • No |
Operating System | 1 | Enter value. |
Patch Status | 3 | • No Policy • No Data • Reboot Required • Install Error • Approved Pending • Fully Patched |
Patch Title (Approved Pending) | 1 | Enter value. |
Patch Title (Installed) | 1 | Enter value. |
Patch Title (Not Approved) | 1 | Enter value. |
Patches Approved Pending | 2 | Enter value. |
Patches Installed | 2 | Enter value. |
Patches Not Approved | 2 | Enter value. |
Physical Cores | 2 | Enter value. |
Privacy Mode | 7 | • Yes • No |
Protected by Datto Continuity | 7 | • Yes • No |
Ransomware Detection Status | 3 | • Active • Error • Inactive • Pending |
Reboot Required | equal to | • Yes • No |
Serial Number | 1 | Enter value. |
Service Display Name | 1 | Enter value. |
Service Name | 1 | Enter value. |
Service Pack | 1 | Enter value. |
Site Description | 1 | Enter value. |
Site Device Group | 6 | Select group. |
Site Group | 6 | Select group. |
Site is OnDemand | 7 | • Yes • No |
Site Name | 1 | Enter value. |
SNMP Description | 1 | Enter value. |
SNMP Location | 1 | Enter value. |
Software Package | 1 | Enter value. |
Software Package (CONTAINS Name)/Version | 5 | Enter software package and version. |
Software Package (EXACT Name)/Version | 5 | Enter software package and version. |
Software Status | 3 | • Compliant • Non Compliant • Unmanaged |
Software Version | 5 | Enter value. |
Status - Online | 7 | • Yes • No |
Status - Suspended | 7 | • Yes • No |
Status - Web Port OK | 7 | • Yes • No |
Warranty Expiration Date | 4 | Select date. |
Windows Firewall | 7 | • Yes • No |
Windows Updates | 7 | • Yes • No |
UDF (1-30) | 1 | Enter value. NOTE Enter the value without quotes (for example, UDF example value). |
Filter criteria wildcard characters
The symbols in the following table function as wildcards for any characters in filter criteria.
To cause wildcard characters to serve as normal characters while filtering for specific results, enter a backslash (\) as an escape character before the wildcard character.
EXAMPLE Filtering for A_C will not limit the results to those containing A_C as an actual underscore because, without the backslash, the underscore is treated as a wildcard character. Those results would also include ABC, for example, because the underscore serves as a wildcard for the middle character (in this case, B). Filtering for A\_C will only populate results containing A_C as an actual underscore.
Wildcard Character | Symbol Name | Criterion Restrictions List | Function |
---|---|---|---|
% | Percent sign | Text search fields (1 and 5). | This symbol functions as a wildcard for zero or more characters in filter criteria. |
_ | Underscore | Text search fields (1 and 5). | This symbol functions as a wildcard for exactly one character in filter criteria. |
* | Asterisk | IP address fields only. | This symbol functions as a wildcard for any numbers in IP address filter criteria. |